The Compac CJ 2T-C 1,500Kg standard trolley jack has evolved from the original design of trolley jacks first designed by the founders of Compac in 1946. Because of it's short chassis this model is perfect for mechanical workshops, tyre shops and mobile mechanics alike .
The CJ 2T-C has a minimum height of 80mm a maximum height of 500mm a chassis length of 730mm and weighs 32Kg, the chassis and lifting arm are fully welded and the hydraulics are fitted with an overload valve to prevent the jack from being used beyond it's rated capacity.
To prevent accidental lowering the release system is designed so that the operator must lift the handle and then turn it to lower the lifting arm. Because the lowering system does not use gear wheels or uni joints it is trouble free and is able to work at any angle that the handle is at, giving to operator complete control over lowering the jack.
A valve is also fitted to the jack that slows the rate of descent of the lifting arm when there is a vehicle on the saddle, this system ensures that the load will not come down at an uncontrollable rate.The jack is fitted with a footpedal for raising the lifting arm quickly to the pickup point when working on vehicles that have a lot of ground clearance.
The pivot point for the handle is set low in chassis meaning that the handle can lay virtually flat when the operator is trying to access pick up points that are set back under the vehicle or obscured by body work. The handle being mounted low in the chassis also means that the handle will be able to pump to raise the vehicle in most situations where other jacks will hit bodywork and prevent you from lifting the vehicle.
To ensure the CJ 2T-C has a long service life only the highest grade of materials are used, the cylinders are fine honed and a protective sleeve is fitted over the main ram, the jack has a powdercoated finish.
To maintain their high standards Compac ensure that all products are tested before they leave the factory and to make sure that you will gain many years of service out of your Compac products a full range of spare parts are avalable even for most models that date back over 25 years.
*Full 3 Year warranty *Rubber coated ergonomically designed handle for operator comfort * "Lift and turn" lowering system prevents unintentional lowering *Trouble free release system that avoids use of gear wheels or uni joints. *Low pivot point for handle for better access and ease of use under low vehicles *Foot pedal provides fast saddle raising to the load *Large diameter swivel wheels for easy handling *Safety lowering control valve for safe lowering even under maximum load *Pressure relief valve prevents overloading *Heavy duty fully welded chassis and lift arm in high quality steel *Noise reducing nylon wheel (avaliable in steel upon request) *Powder coated finish *Full spare parts avalability.
The Compac CJ 2T-C 1,500Kg standard trolley jack has evolved from the original design of trolley jacks first designed by the founders of Compac 1946. Because of it's short chassis this model is perfect for mechanical workshops, tyre shops and mobile mechanics alike .